Description

Eagle Metal Masters Bottom Mounted Immersion Urn Heater for Steam Tables

Food Equipment Water Applications
For Coffee Urns, Steam Tables, Kettles, Humidifiers and other commercial uses

240V 3000W 1PH 6-3/4″L X 3-1/16″ W X 2-1/8″D W/in2 55
This Urn heater has a brass flange, a copper sheath, bottom mounted with an integral low liquid thermal cutout. Hi Limit Cut off Switch

All 4″ Conduit Box requires min. 2-3/8″ mt. hole
Immersion Heater, 4″ Conduit Box 3kw 240V 1ph
Requires Minimum 2-3/8″ Mounting Hole w/cut out
This heater requires a minimum 2-1/2″ liquid depth.
Immersions must be immersed before turning on.

Replaces:
Eagle/Metal Masters 305629

NOTE: Models above 25 Amp or 240v single phase, and all 3 phase models require a suitable contactor to interrupt the heater load, with the cutout connected for pilot duty. See the controls catagory.